logo
E-mail: sales@hxjq.com

Need Help or Have Questions

Order online

Ball Mill

Ball Mill

Ball mill main bearing, the pinion bearings used in bearing grease, oil pump through a pipeline to oil in the grease nozzle is sprayed onto the bearing by timing supplement bearing grease to keep good lubrication bearing.

Introduction to ball mill

It is widely used in cement and silicate products; new building materials, refractory materials, fertilizer, ferrous and nonferrous metal and glass ceramics and other mineral production industries of all kinds of ores and other grind-able materials can be dry or wet grinding. According to different ways of discharge it can be divided into two kinds of lattice type and overflow type.

Ball Mill

How ball mill works

Cylindrical ball mill is a horizontal rotating device. Material will be fed evenly into the first warehouse where has ladder liner or corrugated liner, built with different specifications of steel balls; centrifugal force will raise the ball to a certain height. After the falling, the material will be seriously impacted and abraded. The material will then enter the second silo which is lined with flat liner for further grinding.

ball mill

The steps in detail when problems happen in running the ball mill

When the ball mill is running, there is regular beating noise. The temperature of ball mill and reducer is high. When ball mill reducer is driving, there will be a huge vibration. When the ball mill reducer is running, the sound is unusual.

For the common problems in operation, in order to resolve these issues better we should adopt different solutions according to different reasons.

Match of ball diameter is very important: pay attention to the size of ball diameter, which can improve efficiency.

Change the formula is to increase the strength and weight of the ball (to increase its inertia).Grinding time and efficiency have no relationship, because efficiency itself is the ratio of effort and time.

Methods of increasing speed include the use of inverters and modified deceleration device (if there is deceleration device).

Then there is a must to add water during milling time. Also, dispersant can be added to improve the milling efficiency.

Technical parameters

Model Shell rotation speed
(r/min)
Ball load
(t)
Feeding size
(mm)
Discharging size
(mm)
Capacity
(t/h)
Motor power
(kw)
Total weight
(t)
Ф900×1800 36-38 1.5 ≤20 0.075-0.89 0.65-2 18.5 5.85
Ф900×3000 36 2.7 ≤20 0.075-0.89 1.1-3.5 22 6.98
Ф1200×2400 36 3 ≤25 0.075-0.6 1.5-4.8 30 13.6
Ф1200×3000 36 3.5 ≤25 0.074-0.4 1.6-5 37 14.3
Ф1200×4500 32.4 5 ≤25 0.074-0.4 1.6-5.8 55 15.6
Ф1500×3000 29.7 7.5 ≤25 0.074-0.4 2-5 75 19.5
Ф1500×4500 27 11 ≤25 0.074-0.4 3-6 110 22
Ф1500×5700 28 12 ≤25 0.074-0.4 3.5-6 130 25.8
Ф1830×3000 25.4 11 ≤25 0.074-0.4 4-10 130 34.5
Ф1830×4500 25.4 15 ≤25 0.074-0.4 4.5-12 155 38
Ф1830×6400 24.1 21 ≤25 0.074-0.4 6.5-15 210 43
Ф1830×7000 24.1 23 ≤25 0.074-0.4 7.5-17 245 43.8
Ф2100×3000 23.7 15 ≤25 0.074-0.4 6.5-36 155 45
Ф2100×4500 23.7 24 ≤25 0.074-0.4 8-43 245 56
Ф2100×7000 23.7 26 ≤25 0.074-0.4 12-48 280 59.5
Ф2200×4500 21.5 27 ≤25 0.074-0.4 9-45 280 54.5
Ф2200×6500 21.7 35 ≤25 0.074-0.4 14-26 380 61
Ф2200×7000 21.7 35 ≤25 0.074-0.4 15-28 380 62.5
Ф2200×7500 21.7 35 ≤25 0.074-0.4 15-30 380 64.8
Ф2400×3000 21 23 ≤25 0.074-0.4 7-50 245 58
Ф2400×4500 21 30 ≤25 0.074-0.4 8.5-60 320 72
Ф2700×4000 20.7 40 ≤25 0.074-0.4 22-80 380 95
Ф2700×4500 20.7 48 ≤25 0.074-0.4 26-90 480 102
Ф3200×4500 18 65 ≤25 0.074-0.4 As per process conditions 630 149
Ф3600×4500 17 90 ≤25 0.074-0.4 As per process conditions 850 169
Ф3600×6000 17 110 ≤25 0.074-0.4 As per process conditions 1250 198
Ф3600×8500 18 131 ≤25 0.074-0.4 45.8-256 1800 260
Ф4000×5000 16.9 121 ≤25 0.074-0.4 45-208 1500 230
Ф4000×6000 16.9 146 ≤25 0.074-0.4 65-248 1600 242
Ф4000×6700 16.9 149 ≤25 0.074-0.4 75-252 1800 249
Ф4500×6400 15.6 172 ≤25 0.074-0.4 84-306 2000 280
Ф5030×6400 14.4 216 ≤25 0.074-0.4 98-386 2500 320
Ф5030×8300 14.4 266 ≤25 0.074-0.4 118-500 3300 403
Ф5500×8500 13.8 338 ≤25 0.074-0.4 148-615 4500 525

Note: Please feel free to give your inquiry in the form below. We will reply you in 24 hours.

Topic:
Company Name:
Name: *
Tel:
E-mail: *
Message:
 
Jaw crusher | Cone crusher | Sand maker | Ball mills | Sitemap.xml
Copyright (c) 2015-2016 Henan Hongxing Mining Machinery Co., Ltd Address: Tanxiang Road, High & New Technology Industries Development Zone of Zhengzhou,China
在线人视频观看免费